Datamax-oneil Performance series User Guide Manuel d'utilisateur télécharger pdf (Page 83)

Menu System | 4

105 Performance Series User’s Guide

Note: The default settings will be used if the print job does not directly specify the

settings.

Note: Most of these settings will affect the internal Quality Label from the Test menu.

Note: Rotating oversized images with Print Truncation enabled may result in truncating

the printout entirely.

Note: Setting the raster mode to transparent will allow for texts, barcodes and images

that support transparency to be copied onto the destination without the white regions

generally associated with images. Setting the raster mode to opaque allows for texts,

barcodes and images to be applied onto the destination with the white pixels from the

source. Generally, this is only notices when text, barcodes or images are placed on top

of each other.

Note: Print on Gap when enabled in Continuous paper mode eliminates simulated gap

between labels. In this mode, vertical adjustment can be used to control the skip space

size for different TOF types.

Note: Print Truncation takes precedence over Print on Gap.

Orientation Portrait

Landscape

Reverse Portrait

Reverse Landscape

Portrait

Raster Mode Transparent

Opaque

Default Font Number (Please see Appendix A

for the appropriate values)

0 to 52 23 (Courier)

Default Symbol Set (Please see Appendix A

for the appropriate values)

[0] PC-8

Default Point Size 4.00 to 999.75 12.00

Default Pitch Size .44 to 99.99 10.00

Print Truncation Enabled

Disabled

Enabled

Print on Gap Enabled

Disabled

Settings Values Ranges Default

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 142 143

Pas de commentaire

Datamax-oneil Performance series User Guide Manuel d'utilisateur Page 83