Datamax-oneil microFlash 4t_4te Depot Bracket Repair Kit Manuel d'utilisateur télécharger pdf

Section 2: Re-routing the Cables and

Replacing the Depot Bracket

1. Attach the five sets of zip ties to the depot

bracket. The zip ties should leave enough room

so that the cables can easily slide through them

(Figure 7).

2. Route the cables through the zip ties so that the

cables fit snugly in the zip ties (Figure 8). Use

Figure 9 as a guide when routing the cables.

For cables that are routed through the AC

Adapter cradle, use the zip ties located in the two

top corners to route the cables.

3. Bundle the cables together in the retainer clip

(Figure 10). Avoid creating sharp bends in the

cable (Figure 11).

4. Re-attach the bracket to the wall.

Figure 7

Figure 8

Figure 9

AC Adapter cradle

Figure 10

Figure 11

Correct

bend

Section 1: Removing the Depot Bracket

and Cables

1. Make sure the depot bracket is not connected to a

power supply. Carefully remove the depot bracket

from the wall (Figure 1).

2. Using wire cutters, cut all zip ties, making sure not

to cut the cable (Figure 2). One set of zip ties is

located within the AC Adapter cradle (Figure 3).

3. Remove the cables from the grey cable retainer

clip. Note how the cables were routed (Figure 4).

4. From the front of the depot bracket, unscrew the

two screws holding the split cable onto the depot

bracket and set aside the split cable. Also, note the

location of the mounting holes (Figure 5).

5. To return the removed split cable, contact Datamax-

O’Neil at (949) 458-0500 for additional instructions.

6. Place the new 5-way split cable onto the back of

the depot bracket, then re-attach the screws based

on the location in step 4 (Figure 6). When attached

correctly, the AC Adapter should be facing up.

7. Attach the nuts and washers to the back of the 5-

way split cable.

8. Proceed to Section 2: Re-Routing the Cables and

Replacing the Depot Bracket.

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Depot Bracket Repair Kit (220226-002

& 220226-102)

Parts List

(1) 210236-101 5-way split cable

(2) 370001-408 Screws

(2) 370029-000 Nuts

(2) 370047-001 Washers

(12) 370030-002 Zip ties

Required Tools

(1) Screwdriver

(1) Pair of wire cutters (or similar tool)

5-way split

cable

Screws, nuts,

washers

(2 each)

Zip ties (12)

1 2

MF4t Depot Bracket Repair Kit 2

Résumé du contenu

Page 1

Section 2: Re-routing the Cables and Replacing the Depot Bracket1. Attach the five sets of zip ties to the depot bracket. The zip ties should leave en

Page 2 - MF4t Depot Bracket Repair Kit

WarrantyThe Company warrants that Datamax-O’Neil products are free from defects in manufacturing materials and workmanship for one (1) year from date

Commentaires sur ces manuels

Pas de commentaire

Datamax-oneil microFlash 4t_4te Depot Bracket Repair Kit Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Imprimeurs Datamax-oneil microFlash 4t_4te Depot Bracket Repair Kit. Datamax-O'Neil microFlash 4t_4te Depot Bracket Repair Kit User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Datamax-oneil microFlash 4t_4te Depot Bracket Repair Kit