Datamax-oneil M-Class Mark II DMXNet II Card Option Manuel d'utilisateur télécharger pdf (Page 14)

Installing the Printer Driver 12

DMX Config Utility

DMXConfig (located on the Accessories CD-ROM) is a Windows

based configuration utility that allows the user to make

changes to the existing printer setup via a direct connection to the host computers serial and parallel connection. This is a

vital tool for the use and configuration of wired and wireless printer setup (especially for printers without displays).



Be sure to use the DMXConfig utility located on the Accessories CD-Rom that is included with your printer. Older versions

might not operate correctly with some printers. For the latest version please visit our web site at www.datamax-oneil.com

Configuration Using a Static IP Address:



Note: The following example uses the DMXConfig software utility to configure the printer. On printers equipped

with a display, the same settings can be changed using the printer’s menu system via the front panel under

COMMUNICATIONS > NIC ADAPTER.

1. Connect the host to the printer with a serial or

parallel cable.

2. Turn on the printer.

3. Launch the DMXConfig utility. Query the printer by

using the Query Printer toolbar button (top-left). This

will connect to the printer and get the current printer

settings.

4. Next select the Communications tab, scroll down to

the network parameters. Set DHCP Status to

Disable, then set following with appropriate values

for your network:

IP Address

Subnet Mask

Gateway Address

5. Send the settings to the printer using the Configure

Printer toolbar button.

6. The printer will reset and will connect to your

network.

Once the previous steps have been successfully completed you may now return to Step 4 in section, Network Card

Setup.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Datamax-oneil M-Class Mark II DMXNet II Card Option Manuel d'utilisateur Page 14