Datamax-oneil M-Class Mark II RFID Option Manuel d'utilisateur télécharger pdf (Page 4)

Start with the Right Media

Use RFID media that meets the specifications required by the encoder type:

Smart Label and Tag Requirements

[1]

HF Media Layout

[2]

UHF Media Layout

Forward

Movement

Forward

Movement

Definitions

[3]

Designator Description

Dimension

Inches Millimeters

A Label Width 4.00 101.6

B Label Lengths 2.00 50.8

C Chip Location Tolerance ± 0.05 ± 1.3

D Label Pitch (minimum) 1.75 44.4

E Chip Inlay Location 1.1 27.9

[1]

See the Operator’s Manual for additional standard media requirements.

[2]

The HF RFID Chip Inlay Location can be left, right, or center justified.

[3]

Definitions referenced by looking down onto the labeling side of the media, and from the leading edge of the label (or

tag) as it moves forward through the printer.



Note: If you have questions selection, contact a Media Representative at (407) 523-5650.

1 2 3 4 5 6 7 8

Pas de commentaire

Datamax-oneil M-Class Mark II RFID Option Manuel d'utilisateur Page 4