Datamax-oneil PrintPAD CN3_4_3e_4e User Guide Manuel d'utilisateur télécharger pdf (Page 6)

PrintPAD CN3/4 & PrintPAD CN3e/4e USER'S GUIDE

Compatible Handheld Computers

Installing the Battery Spacers

1. Verify the battery type being used in the Intermec® CN3 or CN4 Handheld unit.

 Standard Battery (Model AB8)

 Extended Battery (Model AB9)

2. If using the Standard Battery, install the Battery Spacers using a screwdriver.

Note: The PrintPAD CN3/4 & PrintPAD CN3e/4e are intended for use with UL Listed Accessory Handheld Computer

Intermec CN3, CN3e, CN4, and CN4e.

Note: If the extended battery is not being used, the battery spacers must be installed. The battery spacers do not

come installed.

Caution: Over-torquing the screws will strip the screw holes. It is recommended that the screws be tightened by

hand.

Note: The Intermec CN3e handheld unit does not require battery spacers.

Figure 6

Figure 7

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

Datamax-oneil PrintPAD CN3_4_3e_4e User Guide Manuel d'utilisateur Page 6