Datamax-oneil APEX 2 User Guide Manuel d'utilisateur télécharger pdf (Page 11)

2 Loading Supplies

2.1 Adding Paper or Labels

The printer can print text, bar codes and graphics on thermal receipt paper. See “Supply

Specifications” in Section 5.2 for the width, thickness requirements and approved vendors.

Follow these steps to load printer paper.

 Press the Paper Door Release button; the door will open slightly. Open the door the rest of

the way (as shown in Figure 6).

 Grip either side of the paper door and open – it will open 180 degrees.

Note: The Paper Door Release button must be depressed when opening/closing the paper door

 Place the paper roll into the paper supply compartment. Ensure that the paper supply

unwinds from the bottom (as indicated below) with the thermal side closest to the print

head.

 Unroll about 3 inches of paper from the roll and position it between the print head guides.

FIGURE 7: INSTALLING PAPER ROLL

Note: Pull the Paper Roll Leader Out of the Printer. Note the direction of paper travel

FIGURE 6: OPENING PAPER DOOR

Note: Pull Paper Roll

Leader out of printer. Note

direction of paper travel.

Note: The Paper Door Release

button must be depressed when

opening and closing the paper

door.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

Datamax-oneil APEX 2 User Guide Manuel d'utilisateur Page 11