Datamax-oneil H-Class HD Peel & Present Option Manuel d'utilisateur télécharger pdf

HD Peel & Present Option

92-2423-01 Rev.B

1 2 3 4 5 6 7 8 9 10

HD Peel & Present Option 92-2423-01 Rev.B

Page 2

8 8. Push and Lift both Tabs that secure the Lower Roller Assembly to the Front Cover (as shown) and then, while keeping it intact, carefully remove

1 Overview This document describes the contents, installation, and use of the Heavy Duty Peel and Present option for the H-Class printer. After ve

2 DoorCatch B) Press down on the Catch, then pull forward to remove the Door. C) Raise the Access Cover and remove your media from t

3 B) Carefully press the Peel and Present Assembly into the Front Plate Connector. C) Tighten the Mounting Screw to secure the Peel and Pr

4 C) Route the Backing Material under the Assist Roller and the Internal Rewinder. BackingMaterialAssistRollerInternalRewinder

Page 8

5 F) Ensure that READY is displayed on the Front Panel then press the FEED Key and proceed according to your observations:  If REMOVE LABEL is d

6 Maintaining the Heavy Duty Peel & Present Assembly To ensure trouble free operation, the Heavy Duty Peel and Present Assembly should be cle

7 4. Press the Latch to open the Peel and Present Assembly. Then remove the C-Clip that secures the Upper Roller Shaft to the Front Cover. LatchF

Pas de commentaire

Datamax-oneil H-Class HD Peel & Present Option Manuel d'utilisateur