1 GP I/O Serial Installation Guide1 Safety Warnings and CautionsThe following Warnings and Cautions are used throughout this manual:Warning: Warnings
3 GP I/O Serial Installation Guide2 GP I/O Serial Installation Tools Needed• 2.5mm Hex Head Wrench• 3mm Hex Head Wrench• 7mm Nut DriverSafety Overview
2 | GP I/O Serial InstallationGP I/O Serial Installation Guide 4GP I/O Serial Installation Procedure Note: Retain all hardware for reassembly.1. O
GP I/O Serial Installation | 25 GP I/O Serial Installation Guide3. Remove all four 7mm nuts securing the present sensor cable connection cover to
2 | GP I/O Serial InstallationGP I/O Serial Installation Guide 66. Loosen and remove the three (3) 2.5mm hex head screws securing the right side c
GP I/O Serial Installation | 27 GP I/O Serial Installation Guide8. Loosen and remove both (2) socket head screws securing the cover plate to the
2 | GP I/O Serial InstallationGP I/O Serial Installation Guide 89. Insert the GP I/O Serial assembly into the printer chassis and secure it with t
Commentaires sur ces manuels