Datamax-oneil PrintPAD Hinge and_or Latch Replacement Kit Manuel d'utilisateur télécharger pdf

Replacing a Hinge (continued)

7. Carefully tighten the hinge to the printer cover

using the included #3 screws.

The screws are tightened when the screws are

flush with the hinge(s).

8. If you are replacing both hinges, repeat steps

5 through 7.

Note: Your printer may have come with #4

screws included. If the included #3 screws are

loose while tightening the hinge, re-use the #4

screws that were originally used with the hinge

(removed in step 2).

Warning: Do not overtighten the screws. Once

the screws are tightened and flush with the

hinge(s), do not rotate past another 1/4 turn.

Replacing a Hinge

1. Place the printer on a flat surface and open the

printer cover.

2. Using a #1 Phillips screwdriver, unscrew and

remove the existing hinge screws (Figure 2).

3. Remove the hinge from the printer cover.

4. If you are replacing both hinges, repeat steps

2 and 3.

5. Verify the hinge slots (Figure 3a) align with the

hinge indents on the printer case (Figure 3b).

6. Place the new hinge in the hinge recess with the

hinge knuckle facing up (Figure 4).

Figure 2

Figure 3a

Figure 3b

Hinge

Slot

Hinge

indent

Figure 4

Hinge knuckle

220222-000 Hinge and/or Latch

Replacement Kit

Overview

Use the information in this instruction sheet to

replace a hinge and/or latch.

Parts List (Figure 1)

•(1) Latch

• (2) #2 x 1/4 Phillips flat, hi-lo, latch screws

P/N 370205-206

• (2) Hinges

• (8) #3 x 3/8 Phillips flat, hi-lo, hinge screws

P/N 370208-306

Required Tools

• #1 Phillips head screwdriver

General Guidelines

• Parts not suitable for young children; may be a

choking hazard.

Latch screw (2)

Latch (1)

Hinge (2)

Hinge screw (8)

Figure 1

1 2

Résumé du contenu

Page 1 - Figure 1

Replacing a Hinge (continued)7. Carefully tighten the hinge to the printer cover using the included #3 screws. The screws are tightened when the screw

Page 2 - Replacing a Latch

WarrantyThe Company warrants that Datamax-O’Neil products are free from defects in manufacturing materials and workmanship for one (1) year from date

Commentaires sur ces manuels

Pas de commentaire

Datamax-oneil PrintPAD Hinge and_or Latch Replacement Kit Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Imprimeurs Datamax-oneil PrintPAD Hinge and_or Latch Replacement Kit. Datamax-O'Neil PrintPAD Hinge and_or Latch Replacement Kit User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Datamax-oneil PrintPAD Hinge and_or Latch Replacement Kit