Datamax-oneil E-Class Mark III Operator’s Manual Manuel d'utilisateur télécharger pdf (Page 30)

24 Chapter 3 – Printer Operation

The Windows driver is located on the Accessories CD-ROM included with your printer. For the latest version

please visit our web site at http://www.datamax-oneil.com



Be sure your printer’s firmware version is 9.03_0016B or greater. Firmware is available from our

website, for the latest version please visit our web site at http://www.datamax-oneil.com



Be sure your printer’s USB Mode is set to “Printer”. This mode can be viewed/changed via the

printer’s front panel menu under: Communications> USB Port> USB Device Class.

Installing the Windows Driver:

1) Place the Accessories CD-ROM included with your

printer into your computers CD-ROM drive.

2) Once the CD-ROM starts select your printer model then

“Install Driver” from the menu and follow the

instructions on the screen to install.

3) When prompted, select your printer from the list, (i.e.

Datamax-O’Neil E-4xxx Mark III). Continue to follow

the on-screen instructions to install the driver.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 89 90

Pas de commentaire

Datamax-oneil E-Class Mark III Operator’s Manual Manuel d'utilisateur Page 30