Datamax-oneil M-Class Mark II Operator’s Manual Manuel d'utilisateur télécharger pdf (Page 39)

100

Chapter 4 – Menu System 33

SET DEFAULTS * Depending upon the RFID MODULE, selecting YES will return these settings:

If MODE = HF, then:

RFID POSITION = 1.10

HF SETTINGS:TAG TYPE = ISO 15693

RETRY ATTEMPTS = 3

--------------------------------------------------------------------------------------------

----

If MODE = UHF, then:

RFID POSITION = 1.10

UHF SETTINGS:TAG TYPE = GEN 2; TAG DATA SIZE = 96-BIT

RETRY ATTEMPTS = 3

GPIO PORT

Controls the optional Applicator Interface Card’s GPIO function, where:

GPIO DEVICE Sets the option to work with a specific device type, where:

DISABLED Disables the option.

APPLICATOR

Enables the following GPIO parameters for label applicator functions:

• De-asserts Data Ready (DRDY) when the last label starts printing to indicate

completion;

• FEED allowed at any time; and,

• Does not de-assert DRDY upon PAUSE.

BARCODE

VERIFIER

Enables the GPIO Port to work with a bar code verifier.

START OF PRINT Selects the type of input signal required to initiate Start of Print (SOP), where:

LOW PULSE Triggers printing with a low pulse.

HIGH PULSE Triggers printing with a high pulse.

ACTIVE LOW Triggers printing with a low signal.

ACTIVE HIGH Triggers printing with a high signal.

EDGE Triggers printing with a signal edge transition.

END OF PRINT Sets the type of output signal generated to indicate End of Print (EOP), where:

LOW PULSE Outputs a low pulse upon completion.

HIGH PULSE Outputs a high pulse upon completion.

ACTIVE LOW Outputs a logic low upon completion.

ACTIVE HIGH Outputs a logic high upon completion.

SLEW ENABLE Selects the type of input signal required to initiate label slew, where:

STANDARD Triggers slew with a low signal.

LOW PULSE Triggers slew with a low pulse.

HIGH PULSE Triggers slew with a high pulse.

ACTIVE LOW Triggers slew with a low signal.

ACTIVE HIGH Triggers slew with a high signal.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Datamax-oneil M-Class Mark II Operator’s Manual Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Datamax-oneil M-Class Mark II Operator’s Manual