Datamax-oneil Performance series USB Host Manuel d'utilisateur télécharger pdf (Page 11)

2 | USB Host Installation Instructions

USB Host Installation Guide 10

11. Gently separate the panel from the printer frame.

Note: With the display cable still attached, the panel cannot be fully separated.

12.Disconnect the display cable from the front panel connector.

Caution: Do not pull the wires. Pulling the wires could damage both the wires and the

connector.

13.Secure the USB host assembly to the printer chassis using the supplied socket

head screws.

Figure: 2 - 9 USB Host Assembly

Caution: Exercise caution when handling and installing the USB host assembly. The

components are fragile and susceptible to damage.

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Datamax-oneil Performance series USB Host Manuel d'utilisateur Page 11