Datamax O'Neil H-8308P Manuel de l'opérateur télécharger pdf (Page 20)

D. If loading media for the first time, or if switching media types, widths or configurations,

position the Media Sensor as detailed in Section 3.2; otherwise, go to Step E.

If loading thermal transfer media, also load ribbon; see Section 3.3.

E. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.

F. Close the cover. With READY displayed, press the FEED Key until at least one gap (or

mark) advances.

If your media is less than the width of the printhead, adjust the Leveling

Cam; see Section 5.4.1.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 115 116

Pas de commentaire

Datamax O'Neil H-8308P Manuel de l'opérateur Page 20