Datamax-oneil Performance series Present Sensor Manuel d'utilisateur télécharger pdf (Page 11)

2 | Present Sensor Installation

Present Sensor Installation Guide 10

14.Connect the ribbon cable from the present sensor to the connector on the PCB

assembly and connect the remaining extension cable connector to the other cable

connection.

Note: Ensure the ribbon cable is seated evenly in the connector before securing the

pressure fitting tab.

15.install the PCB assembly, mounting plate and cover and secure it with the two (2)

screws provided in the kit.

Note: Route the cable out of the bottom corner of the cover.

Figure: 2 - 10 Present Sensor PCB Installation

Cable Route

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Datamax-oneil Performance series Present Sensor Manuel d'utilisateur Page 11