Datamax-oneil Performance series Present Sensor Manuel d'utilisateur télécharger pdf (Page 13)

2 | Present Sensor Installation

Present Sensor Installation Guide 12

17. Insert the connector through the slot in the cover.

Note: The ferrite should be adhered to the inside of the cover with tape.

Figure: 2 - 12 Present Sensor Ferrite and Cover

Note: The cable should be routed through the ferrite as shown.

18.Secure the cover to the media cover with three nuts.

Note: Ensure the cable going to the present sensor PCB assembly is routed through the

opening on the left rear of the cover.

Ferrite

Connector

Slot

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Datamax-oneil Performance series Present Sensor Manuel d'utilisateur Page 13