Datamax-oneil S2000i User Guide Manuel d'utilisateur télécharger pdf (Page 17)

6 Bluetooth™ Communications

The printer control card communicates with the Bluetooth™ base band interface at 38,4 K Baud/sec for serial interface

printers using no parity. To select the Bluetooth™ interface, Dip Switch # 6 must be ON and all other Dip Switches must

be OFF. If required by the host application to enter 0 (digit zero) for PIN number while connecting to the BT module.

Bluetooth settings can be changed via the AT command set (Refer to 2000i_Bluetooth Addendum on Dev. CD).

The table below details the Bluetooth default settings:

Settings Value

Name Datamax-O’Neil Printer

Serial Settings

38,400,8,n,2,n

Discoverability mode Generally Discoverable

Connectivity mode GAP Connectable

Security mode Security Disabled

Fixed PIN 0 (Zero)

Set Master/Slave Policy Always let the connecting device select the master/slave role on

incoming connections

Client Profile Disable Client Services

Server Profile

Serial Port Profile Server enabled

Wireless Multi-drop mode disabled, forward to host only

Configuration over Bluetooth Enabled

Power Save mode Allow Sleep mode only

ESC sequence timing

500ms before ESC command & 500ms thereafter

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Datamax-oneil S2000i User Guide Manuel d'utilisateur Page 17