Datamax-oneil Class Series Programmer’s Manual Manuel d'utilisateur télécharger pdf (Page 40)

System-Level Command Functions

Class Series Programmer’s Manual 26

STX r Select Reflective Sensor

This command enables reflective (black mark) sensing for top-of-form detection of rolled butt-cut,

and fan-fold or tag stocks with reflective marks on the underside. This Media Sensor will detect a

minimum mark of 0.1 inches (2.54 mm) between labels (see the Operator’s Manual for media

requirements). The end of the black mark determines the top of form. Use the <STX>O command to

adjust the print position.

Syntax:

<STX>r

Default setting: Edge sensing

STX S Set Feed Speed

This command controls the output rate of the media when the FEED Key is pressed.

Syntax:

<STX>Sn

Where:

- Is a letter value (see Appendix L).

STX s Set Single Buffer Mode

(Non-Display Models only)

This command, available for backward compatibility, instructs the printer to use single buffer

operation. In single buffer mode, the printer will erase and format all fields. This, in turn, decreases

printer throughput when incrementing, decrementing, or replacement fields are used (see Label

Formatting Commands). See <STX>d.

Syntax:

<STX>s

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 299 300

Pas de commentaire

Datamax-oneil Class Series Programmer’s Manual Manuel d'utilisateur Page 40