Datamax-oneil H-Class Operator’s Manual Manuel d'utilisateur télécharger pdf (Page 108)

98 H-Class

A. Turn OFF the Power Switch and unplug the power cord from the AC Receptacle.

B. Raise the Cover then remove the Door and tearbar. Unlock the Printhead Latch and

raise the Printhead Assembly.

C. Remove media and ribbon.

D. Using a Cotton Swab (or lint-free cloth) dampened with isopropyl alcohol, wipe the

Platen and the Assist Roller clean. Manually rotate the rollers as necessary, wiping,

rotating, and repeating until the surfaces of each are clean.

5.5.6 Cleaning the Ribbon Path Components (Thermal Transfer equipped)

Smooth ribbon flow can become impeded if the components are dirty. Clean them as follows:

A. Turn OFF the Power Switch and unplug the power cord from the AC Receptacle. Raise

the Cover then remove media and ribbon.

B. Using a Cotton Swab dampened with alcohol, wipe the Ribbon Idlers clean.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 179 180

Pas de commentaire

Datamax-oneil H-Class Operator’s Manual Manuel d'utilisateur Page 108