Datamax-oneil H-Class Operator’s Manual Manuel d'utilisateur télécharger pdf (Page 59)

H-Class 49

Printer Options (continued)

Menu Item Details

END OF PRINT

Sets the type of output signal generated to indicate

EOP, where:

LOW PULSE

Outputs a low pulse upon completion.

HIGH PULSE

Outputs a high pulse upon completion.

ACTIVE LOW

Outputs a logic low upon completion.

ACTIVE HIGH

Outputs a logic high upon completion.

RIBBON LOW

Sets the low ribbon signal (as determined by RIBBON

LOW OPTIONS; see Section 4.2.1), where:

ACTIVE LOW

Outputs a logic low when the roll size reaches the

setting.

ACTIVE HIGH

Outputs a logic high when the roll size reaches the

setting.

SLEW ENABLE

Selects the type of input signal required to initiate

label slew, where:

STANDARD

Triggers slew with a low signal.

LOW PULSE

Triggers slew with a low pulse.

HIGH PULSE

Triggers slew with a high pulse.

ACTIVE LOW

Triggers slew with a low signal.

ACTIVE HIGH

Triggers slew with a high signal.

BACKUP LABEL

Determines reverse label motion when the GPIO option

is installed and enabled, where:

DISABLED

Disables backup.

ACTIVE LOW Triggers backup with a low signal.

ACTIVE HIGH

Triggers backup with a high signal.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Datamax-oneil H-Class Operator’s Manual Manuel d'utilisateur Page 59

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Datamax-oneil H-Class Operator’s Manual