Datamax-oneil DPL Programmer’s Manual Manuel d'utilisateur télécharger pdf (Page 112)

Extended System-Level Command Functions

104

STX KtU Read Unique Serial Number from RFID Tag

(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)

This command instructs the RFID device to read the unique serial number data from the

tag and then place that data into a replaceable field. It is expected that the tag

transponder will be within the read / write distance of the RFID programming device;

otherwise, “Void” will be printed in the text or bar code label field(s).



This is a sixteen character alphanumeric value; the replaceable field must have an

adequate length.

Syntax:

STX>KtU

Where:

The number of retry attempts, 0-9.

Reserved. Should be 0.

Field number in which to place the data (must be 01,

02, 03, etc.) matching the order of Label Formatting

command, U.



A 00 value will send the ID to the host with no printing.

STX KtW Write Data to RFID Tag

(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)

This command instructs the RFID device to write data to the tag. It is expected that the

tag transponder will be within the read / write distance of the RFID programming device;

otherwise, a warning will occur and a warning message (Read / Write Fail) will be

displayed.

Syntax:

STX>KtW

…

aabcdee…

<CR>

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 295 296

Pas de commentaire

Datamax-oneil DPL Programmer’s Manual Manuel d'utilisateur Page 112