Datamax-oneil DPL Programmer’s Manual Manuel d'utilisateur télécharger pdf (Page 116)

Extended System-Level Command Functions

108

STX KuW Write Data to RFID Tag

(Direct Mode – UHF Interface – Hexadecimal Data Only)

This command instructs the RFID device to write data to the tag. It is expected that the

tag transponder will be within the read / write distance of the RFID programming device;

otherwise, a warning will occur and a warning message (Read / Write Fail) will be

displayed.

Syntax:

STX>KuW

bcc…

Where:

The number of attempts to locate, erase and program

the tag (1 – 9).

Reserved. Should be 0.

cc…c

Data to be encoded in the ASCII format. Must be

sixteen characters in length. The valid characters are

0-9, A-F.



Must be 16 or 24 characters long.

Sample:

<STX>KuW10ABCDEF0102030405[CR]

The sample above programs the data

<0xAB><0xCD><0xEF><0x01><0x02><0x03><0x04><0x05> to the

tag, attempting to write one additional time if necessary.

STX KV Verifier Enable/Disable

This command allows a verifier to be enabled and disabled.

Syntax:

STX>KVa

Where:

Y = verifier enable

N = verifier disable



This command will result in a system reset for the EX2.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 295 296

Pas de commentaire

Datamax-oneil DPL Programmer’s Manual Manuel d'utilisateur Page 116